Home | Careers | Font size A A A

Bureau of Utilities - Water & Sewer Location Office

Location : 8270 Old Montgomery Rd.
Hours : Mon-Fri, 7:30 a.m. to 4:00 p.m.
Phone : 410-313-4982   -   Fax : 410-313-4989
After Hours Emergencies : 410-313-2929
 Call Miss Utility before you dig

As a member of Maryland's "One Call Concept" system ( or "Miss Utility" ) Howard County receives more than 100 daily requests from excavators to locate and mark public water and sewer lines.

Please call "Miss Utility" at 1-800-257-7777, or 811, at least 48 hours prior to work, to have all utilities located. ( BGE, Verizon, Comcast, etc. )

Blue paint = Water lines   -   Green paint = Sewer lines

See below for corresponding marking color codes for all utilities.

Note to Homeowners :

Howard County does not locate or mark your private water and sewer lines. We have no information or maps indicating specifically where the plumber installed your private water and sewer lines. We only mark up to your property line, which usually means your water meter ( or ball valve ) and the sewer cleanout that is usually located along your property line.

Anything beyond that point and your house, including your sewer cleanout, is considered your private water and sewer lines and are your responsibility to maintain and have located, if needed.

However, some things to keep in mind :

By code, the plumber should have installed your water and sewer lines at least 36" deep. That is the "frost line" for this area, to prevent freezing in winter. If you're digging 18" or less, there should be no conflict with your water or sewer lines.

( Though we do not recommend planting trees with deep root systems over your sewer line. A potential sewer blockage issue in the future. )

Also, as an example, if a plumber was to repair your outside water service, they would look for two points of reference to determine how your water line runs on your property :

  • the location of the water meter ( or ball valve ) at the property line.
  • the point at which your water comes into your house.

Between those two points they would have a general idea of how the water runs on your property. It's usually a 'straight shot' between those two points, but that's the type of knowledge, about your private water and sewer lines, for which the County has no specific information.

Howard County is legally obligated to locate / mark our public water and sewer utilities only when an excavator is digging within 5 feet of our utilities.

However, we realize that ball valve box lids and sewer cleanouts sometimes get buried, or you just can't determine where they're located. If you would need these items located, to assist you in determining how your private water and sewer lines run on your property, please give us a call at 410-313-4982. We will be happy to send a locator out to your home with any location information and a metal detector, to locate these two items. This will show the area at which water and sewer come onto your property.

In Howard County, the water meter ( or ball valve ) is the County's responsibility to maintain, whereas the sewer cleanout is the homeowner's responsibility to maintain.

An illustration of where the County's responsibility ends and the homeowner's responsibility begins for your sewer service.



Getting responses from your Miss Utility ticket :


As per Maryland's State Senate Bill 879, passed in May 2001, all Utility owners are required to provide a "Positive Response" to all One Call Concept Tickets.

If you have called in a ticket, you can check the "status" of your ticket, indicating the various utilities that have been "marked" or "cleared" for your job, at Miss Utility's website.

You can also call the toll-free Miss Utility Ticket Check® system to get the "status" of your ticket.

Miss Utility Ticket Check ® - 1-866-821-4226.

Please have your ticket number available. You will be prompted for an "ID Code". That will be the callback phone number you provided when you called in the ticket.

Please allow 48 hours for your ticket to be processed.

Each Utility ( BGE, Comcast, Verizon, etc. ) will provide a "Response Code" :

    Code 1: Clear/No conflict.
    Code 2: Marked.
    Code 3: 24- hour delay.
    Code 4: 48- hour delay.
    Code 5: Not complete/In progress: Have spoken with the excavator.
    Code 9: Marked up to privately owned utility.
    Code 10: Incorrect address information.


Back to the top of page

Bureau of Utilities - Underground Utility Markings - Color Code
UNDERGROUND UTILITY MARKINGS - COLOR CODE
 
   WHITE - Proposed Excavation
   PINK - Temporary Survey Markings
   RED - Electric Lines, Conduit and Lighting Cables
   YELLOW - Gas, Oil, Steam, Petroleum or Gaseous Materials
   ORANGE - Communication, Alarm or Signal Lines
   BLUE - Potable Water
   PURPLE - Reclaimed Water, Irrigation and Slurry Lines
   GREEN - Sewers and Drain Lines

Download the above color chart.   Suitable for printing.
( 6.5 X 5 inches ) - PDF file - 24 Kb

Miss Utility's Homeowner Brochure  containing additional information.
PDF file - 2 Mb

Bureau of Utilities Links : Return to Water Issues
Utilities  |  Tech Support  |  Maintenance  |  Meters  |  LPWRP  |  Issues